CT 233 - KOSTER VAP I 2000 FS

KOSTER VAP I® 2000 FS is a fast-setting, one-coat, membrane-forming, moisture vapor control system consisting of a unique combination of epoxy resins and other compounds formulated to prevent floor covering failures on concrete slabs with elevated levels of moisture. KOSTER VAP I® 2000 FS meets or exceeds the performance requirements in ASTM F3010-13 Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings. KOSTER VAP I® 2000 FS has no upper limit for water vapor emission from concrete floor slabs. It can be applied to concrete slabs with relative humidity up to 100% RH and it provides protection from sustained exposure to pH 14. Due to its unique formulation, KOSTER VAP I® 2000 FS is extremely effective at blocking moisture. With a low permeance of 0.047 perms, KOSTER VAP I® 2000 FS is an excellent moisture blocker for virtually all types of flooring, including low permeance flooring such as sheet goods and rubber tile. KOSTER VAP I® 2000 FS is compliant with all state and federal VOC regulations, having VOC content of 0 g/L, which allows installation in sensitive areas such as hospitals, schools, and grocery stores. LEED Indoor Environmental Quality Credits are available for EQ 4.2 (Low-Emitting Materials, Paints and Coatings).

Questions?  Click here for KOSTER I 2000 FAQs!

Coverage: KOSTER VAP I 2000 FS moisture control coating must be installed at a minimum continuous layer thickness ≥ 11 mils (0.011 in). Spread rate on ICRI CSP 3 surface is not to exceed 150 sq ft/gal.

Unit Size

3 gallon kit (CT 233 003)






 

Back

Top
Albania Austria Bosnia and Herzegovina Brasil Bulgaria China Croatia Czech Republic Denmark Finland Germany Ghana Greece Hungary Italy Japan Kazakhstan Kuwait Latvia Lebanon Macedonia Mexico Netherlands New Zealand Norway Panama Poland Portugal Romania Russia Senegal Serbia Slovakia Slovenia South Africa Spain Thailand Turkey Ukraine United Kingdom United States of America